본문 바로가기 주메뉴 바로가기
  •  
  •  A/S 신청 및 상담

    02-3439-2208
  •  제품기술문의

    02-3439-2203/2205/2206
> >

PRP 시리즈

  • 프로그래머블 스위칭 DC 전원공급기, PRP
  • 출력 채널 : 1CH
  • 출력 전압 : 0~20V
  • 출력 전류 : 0~10A/20A
  • 출력 전력 : 200W/400W
  • 인터페이스 : RS-485
 온라인 견적요청

주요 특징

• Voltage Rating: 20V

• CV/CC Priority; Particularly Suitable for the Battery and LED Industry

• Adjustable Slew Rate

• Series Operation: Up to 2 units

• Parallel Operation: Up to 3 units

• High Efficiency and High Power Density

• 1/6 Rack Mount Size Design (EIA/JIS Standard)

• Standard Interface: RS-485

 

The PRP-Series is a single-output multi-range programmable switching DC Power Supply covering a power range up to 400W. This series of products include two models with the combination of 20V rated voltages and 200W, 400W maximum output powers. As the PRP-Series can be connected in series for maximum 2 units or in parallel for maximum 3 units, the capability of connecting multiple PRP units for higher voltage or higher current output provides a broadcoverage of applications.

 

The CV/CC priority selection of the PRP-Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply.With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode is activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-onstage,the PRP-Series is able to run under CC priority to limit the current spike occurred at the threshold voltage and therefore protect DUT from the inrush current damage.

 

The adjustable slew rate of the PRP-Series allows user to set for either output voltage or output current a specific rise time at the low to high level transition, and a specific fall time at the high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. The manufacturing tests of lighting device or large capacitor during power output-on are mostly associatedwith the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power on-off can significantly reduce the spike current and protect the device from high current damage.

 

The OVP and OCP are provided with the PRP-Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection level is tripped, the power output will be switched off to protect the DUT. The PRP-Series provides RS-232/RS-485 interfaces as standard. An analog control/monitoring connector is also available on the rear panel for external control of power On/Offand external monitoring of power output Voltage and Current.

 

 

PRP-Series Reasonably Priced DC Power Supply

Model Name

Voltage

Current

Power

PRP 20-10

0 ~ 20V

0 ~ 10A

200W

PRP 20-20

0 ~ 20V

0 ~ 20A

400W

제품 사양

PRP 20-10

PRP 20-20

정격 출력

 

전압/전류/전력

 

0~20V

0~20V

0~10A

0~20A

200W

400W

변동률 

CV 모드 (부하/라인)

20mV

18mV

CC 모드 (부하/라인)

41mA

41mA

리플 & 노이즈 (노이즈 대역폭 20MHz,리플 대역폭 1MHz)

CV 모드

60mVpp/

7mVrms

CC 모드

72mArms

프로그래밍 정확도

전압/전류

0.1%+10mV

0.1%+30mA

측정 정확도

전압/전류

0.1%+10mV

0.1%+30mA

반응 시간

상승 시간

50ms

하강 시간 (전부하/무부하)

50ms

500ms

부하 과도 회복 시간 (50%~100%부하 변경)

1ms

프로그래밍 분해능(PC 원격 제어 모드)

전압/전류

1mV/1mA

측정 분해능 (PC 원격 제어 모드)

전압/전류

1mV/1mA

직렬/병렬 기능

병렬 동작 : 최대 3대 연결가능 (마스터 장치 포함), 직렬 동작 :최대 2대 연결 가능 (마스터장치 포함)

보호 기능

OVP : 정격 출력전압의 10%~110%, OCP : 정격출력 전류의 10%~110%, OHP : 내부온도 상승에 의해 활성화

패널 디스플레이(4디지트) 정확도

전압/전류

0.1%±20mV

0.1%±40mA

리드백 온도 계수

전압 : 정격 전압의 100ppm/℃, 30분 예열 후; 전류 : 정격 전류의 200ppm/℃, 30분 예열 후

일반

인터페이스

RS-485, 아날로그 제어 I/O

환경 조건

동작 온도./습도 : 0℃~50℃, 20%~85% RH(무응결); 보관 온도/습도 : -25℃~70℃, 90% RH 이하(무응결)

AC 입력 전원

85VAC~265VAC, 47~63Hz, 단상

치수 및 무게

71(W) x 124(H) x 350(D) mm, 약 3kg

 

주문 정보

PRP 20-10

(0~20V/0~10A/200W) 1채널 프로그래머블 스위칭 DC 전원 공급기

견적요청

PRP 20-20

(0~20V/0~20A/400W) 1채널 프로그래머블 스위칭 DC 전원 공급기

견적요청