주요 특징

• 500VA AC Test Capacity

• 240x64 Ice Blue Dot matrix LCD

• Sweep Function for DUT characteristic analysis

• Insulation resistance measurement up to 50GΩ(GPT-9903/9904)

• Manual/Auto Mode

• Function Key for quick selection

• High intensity flash for caution & Status indication

• Safety INTERLOCK function

• Zero Crossing Turn-on Operation

• Controllable Ramp-up Time

• True RMS Current Measurement

• High resolution: 1uA for measuring current, 2V for setting voltage

• PWM amplifier to enhance the power efficiency and reliable testing

• Max. 100 memory block for test condition (step) setting. And each step can be named individually.

• Remote terminal on the front panel for “start” and “stop” control

• Rear panel output available

• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

A Solid Foundation for Reliable, Safe and Practical Safety Compliance Testing

The GPT-9900 series, with 500VA maximum output capacity, is a new safety tester (hi-pot tester/hipot tester). The family of four, including GPT-9904, GPT-9903A, GPT-9902A and GPT-9901A, come joining the GPT-9800 series, which carries 200VA output capacity, to serve the market with higher power demands for the safety tests of electronic products and components. The GPT-9000 series supports the major test items among all the needed for the compliance ofthe safety standards such as IEC, EN, UL, CSA, GB, JIS and other safety regulations.

The GPT-9900 series is built upon a platform of AC 500VA maximum power output. The GPT-9904 is a 4-in-1 model capable of performing AC withstanding, DC withstanding, insulation resistance and ground bond tests, whereas the GPT-9903A is a 3-in-1 model capable of performing AC withstanding, DC withstanding and insulation resistance tests. The GPT-9902A is capable of performing both AC and DC withstanding tests whereas The GPT-9901A is able to only performAC withstanding tests.The GPT-9900 series safety tester follows every good feature and advantage of the GPT-9800 series. The high-efficiency PWM amplifier is the core of GPT-9900 platform design to impede the influence from the voltage fluctuation of input AC source. The output voltage is automatically cut off (within 150μs) upon the detection of an abnormal output voltage or a trip of current limits during test to protect the operator from hazardous injury. The GPT-9900 series automatically discharges the DUTafter each test to eliminate excessive voltage that remains on the DUT.

Following a tidy and easy-to-use design concept, the GPT-9900 series is equipped with a simple & clear panel layout, a high resolution dot matrix LCD display, and color LED indicators, allowing operators to interpret measurement results easily and quickly. In the role as the complement of 200VA safety testers, the GPT-9900 series is designed upon a 500VA output platform to enhance all major test functions, including AC withstanding (AC 5kV/100mA),DC withstanding (DC 6kV/20mA), insulation resistance (DC 50V ~ 1000V/50GΩ max.) and ground bond (AC 32A max./650mΩ max.) tests, with high-power measurement capabilities. Further more, the test duration, ramp up time and upper/lower limits of the output voltage are fully-adjustable to accommodate a wide variety of safety tests with accurate measurement results. The “Sweep” function of the GPT-9900 series is able to display the test results point by point all through the testing period to form a trace graph.This graphic display performs the characteristic verification of a DUT through observing the parameter response to the changes of the applied voltage or current or testing time. On the graph a movable marker is available to get the parameter reading on the specific point of user’s interest.

Other significant functions and features of the GPT-9900 series include the rear panel output for system applications, the open-circuit detection to ensure proper connections of apparatus for ground bond test, 100 sets of memory to save and recall the panel settings for individual or sequential tests, a remote output on-off terminal in the front panel and a signal I/O port in the rear panel provided as the means for remote start/stop control of the safetytester, and RS-232C, USB and GPIB (optional) interfaces available for PC remote control and test result logging.

기본 액세서리

쿽 스타트 가이드 x 1, 전원 코드 x 1, 사용 설명서 CD x 1, Interlock 키 x 1, Remote 단자 플러그(수) x 1, 

고전압 테스트 리드 GHT-114 x 1, 그라운드 본드 테스트 리드 GTL-115 x 1 (GPT-9904)

옵션

옵션.01

GPIB 카드

옵션.02

GSB-01 멀티플렉스 스캐너 박스 (8CH HV)

옵션.03

GSB-02 멀티플렉스 스캐너 박스 (6CH HV/2CH GB)

옵션 액세서리

GHT-113

고전압 테스트 피스톨

GHT-205

고전압 테스트 프로브

GTL-232

RS-232 케이블, 9핀(암)-9핀, 널모뎀

GTL-247

USB 케이블, AA 타입, 약 1.8M

GTL-248

GPIB 케이블, 약 2M

GTL-251

GPIB-USB-HS (High Speed)

GRA-417

랙 어댑터패널(19”, 4U) (*GPT-9904 모델에 사용할 수 없습니다.)

주문 정보

GPT-9904

AC 500VA ACW/DCW/IR/GROUNDBOND 테스터

견적요청​​​

GPT-9903A

AC 500VA ACW/DCW/IR 테스터

견적요청​​​

GPT-9902A

AC 500VA ACW/DCW 테스터

견적요청​​​

GPT-9901A

AC 500VA ACW 테스터

견적요청​​​

옵션

옵션.01

GPIB 카드

견적요청​​​

옵션.02

GSB-01 멀티플렉스 스캐너 박스 (8CH HV)

견적요청​​​

옵션.03

GSB-02 멀티플렉스 스캐너 박스 (6CH HV/2CH GB)

견적요청​​​

옵션 액세서리

GHT-113

고전압 테스트 피스톨

견적요청​​​

GHT-205

고전압 테스트 프로브

견적요청​​​

GTL-232

RS-232 케이블, 9핀(암)-9핀, 널모뎀

견적요청​​​

GTL-247

USB 케이블, AA 타입, 약 1.8M

견적요청​​​

GTL-248

GPIB 케이블, 약 2M

견적요청​​​

GTL-251

GPIB-USB-HS (High Speed)

견적요청​​​

GRA-417

랙 어댑터패널(19”, 4U) (*GPT-9904 모델에 사용할 수 없습니다.)

견적요청​​​

상기 가격은 부가세 별도 가격입니다.